Moog Werkstatt-01 Kit 單聲道類比合成器

品牌分類: 商品標籤:

商品介紹

Moog Werkstatt-01 Kit 單聲道類比合成器


功能介紹:

VCO (Voltage Controlled Oscillator):Werstatt有一個主震盪器,可切換兩種波型,鋸波跟方波,可用FREQ旋鈕調整音高,另有PWM (Pulse Width Modulation) 旋鈕,可調整方波的Pulse Width。

VCF (Voltage Controlled Filter):Werkstatt使用的是24dbB low pass濾波,有Cut Off跟Resonance的旋鈕。

VCA (Voltage Controlled Amplifier):Werkstatt是沒有設計音量控制的,取而代之的是兩個模式,ON mode或 EG mode。ON模式代表持續輸出音量,而EG模式的音源是通過Werkstatt的封包 (Envelope) 控制的。

VCO MOD (Modulation of the Voltage Controlled Oscillator):Werkstatt可以使用封包或LFO (低頻震盪器)來調變VCO的FREQ或PWM的參數,利用AMOUT旋鈕控制調變的比例。

VCF MOD (Modulation of the Volatge Controlled Filter):跟VCO MOD類似,只是調整的對象是VCF的Cut off frequency,有一個POLARITY切換可以控制輸入源的正反相位。

LFO (Low Frequency Oscillator):Werstatt內建一個低頻震盪器,有兩種波型可以切換,方波跟三角波。LED燈可以看到低頻震盪器的速度。
Envelope:Werkstatt的attack跟decay時間可用旋鈕調整,sustain可以切換ON/OFF兩種模式。

Werkstatt的機身右側有一格一格的欄位,可以利用零件包裡的mini電線進行訊號的串接,做出複雜的聲響。

MOOG 台灣總代理穎凱非人為故障保固二年

規格-

OSCILLATOR SECTION

• Single VCO w/ frequency control (8Hz to 16KHz)

• Saw and square waveshapes w/ control for square pulse width

• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control

• Ability to PWM the square wave

FILTER SECTION

• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)

• Select between the Envelope generator and LFO as Mod Source.

• Polarity switch (+/-) and amount knob for control of filter cutoff modulation

LFO SECTION

• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

VCA/AMP SECTION

• Select between the Envelope Generator or ON (Drone)

ENVELOPES SECTION

• Controls for Attack & Decay time w/ Sustain On/Off switch

KB SECTION

• One octave low-note priority legato keyboard w/ glide control

PATCHBAY

• VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode

• VCF Input-5V to +5

• VCO LINEAR FM Input +/-2.5V – NOTE: this is an inverting control input

• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable

• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel

• VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF

• 2x KB CV Output3V/semitone from 1 keyboard – NOTE: Attenuate for 1V/Octave

• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority

• 2x GATE Output0 to +5V signal generated from low-note priority

• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator

• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch

• 2x VCF Output-2V to +2 V signal for audio or CV uses

• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch

Rear Panel

• AUDIO Output Nominal +/-1.5V Signal

• POWER+12VDC Center Positive w/ 1.2A Wall transformer

• POWER CONSUMPTION 1.8 Watt AVG

穎凱國際 Sound Sketch